Jump to content

CK seeking to upgrade the Self Defense Army


Lyzah

Recommended Posts

We are seeking to improve the standard weapons load carried by our regular army. Currently our army is equip with a 'square sword' which must be upgraded by next year. Should your nation have an arms company willing to sell 2,000 assult rifles, please contact our administation with the types and specifications of rifles available.

Link to comment
Share on other sites

*Private to CK*

We can supply arms if CK wishes. If they give us the orders we might be able to help them in the arms section.

**Classified Secret**

We are in the market for:

Regular Army:

2,000x M14

Special Ops:

x 50 HKMP7a1PDW w/ silencer

x 50 T.A.R 21 Tavor

x 50 M1911

Edited by Lyzah
Link to comment
Share on other sites

We have a couple thousand surplus M-14 rifles. If wanted I'll have my armorers go over each one to give it a good fine toothed cleaning and detailing. We'll ship with ammo and clips if wanted as well.

We thank you for your service. It's imperitive that we are able to complete the entire order. Should you be able to supply us with the remainder of our request, whether be from your own arms supply or through alternative means, could prove in your favor in establishing strong relations between our leaders and your nation.

Link to comment
Share on other sites

It will take us about a month to process all the rifles through our armory for maintenance and repairs. What we suggest is you have a team of your men come to Boomtown and we'll put them through a brief familiarization course. Once the weapons are ready we'll ship them, and your men back to Chang Khong via air.

If needed we'll be happy to send along a small detachment of trainers to assist your military in honing their skills as the jump from square swords to M-14 rifle is a bit of a significant one.

Once completed the rifles will have been refitted to fiberglass stocks, new trigger assemblies, firing pins, and receivers.

Do you require bayonets with this rifle?

Also do you have the tactical gear that is tailored for carrying 7.62 mm rounds and clips?

We can and will provide these items at cost given your friendship treaty with the Dragonsian Empire. Any friend of DE is a friend of ours.

Link to comment
Share on other sites

It will take us about a month to process all the rifles through our armory for maintenance and repairs. What we suggest is you have a team of your men come to Boomtown and we'll put them through a brief familiarization course. Once the weapons are ready we'll ship them, and your men back to Chang Khong via air.

If needed we'll be happy to send along a small detachment of trainers to assist your military in honing their skills as the jump from square swords to M-14 rifle is a bit of a significant one.

Once completed the rifles will have been refitted to fiberglass stocks, new trigger assemblies, firing pins, and receivers.

Do you require bayonets with this rifle?

Also do you have the tactical gear that is tailored for carrying 7.62 mm rounds and clips?

We can and will provide these items at cost given your friendship treaty with the Dragonsian Empire. Any friend of DE is a friend of ours.

Yes, please provide bayonets with the m14s. Since we do not have an airport , we'll send a team to DE and link up with your team there once the goods are completed, so we won't trouble BT more than we have to and bring the cargo up ourselves. No training on the m14s are necessary for we have personnel who have knowledged in the m14 and will be training our regular army.

Please be advised that these weapons are not meant to be used, only for disipline and show of force; thus, there's no need for new attachments. The origional attachments will better suit our needs.

We are glad you mentioned the tactical gear suited for 7.62mm rounds and would like for you to provide those as well, if BT is able. We desire our personnal to carry six magazines as part of their combat load and will need about 12000 7.62mm magazines to accomidate their combat load requirements.

Link to comment
Share on other sites

OOC: I'm assuming any weapon that wasn't completely decimated in the MOAB blast would be sold, so...

IC: Former USB arms dealers are willing to sell Kar98ks, STG44's, M16's, MP40s, and much more. The weapons can be shipped to you immediately, all you need to do is say the word.

Please allow us to investigate these \weapon systems and get back to you at a later date.

Link to comment
Share on other sites

OOC: I'm assuming any weapon that wasn't completely decimated in the MOAB blast would be sold, so...

IC: Former USB arms dealers are willing to sell Kar98ks, STG44's, M16's, MP40s, and much more. The weapons can be shipped to you immediately, all you need to do is say the word.

negative on the m16 :P

Link to comment
Share on other sites

OOC: I'm assuming any weapon that wasn't completely decimated in the MOAB blast would be sold, so...

IC: Former USB arms dealers are willing to sell Kar98ks, STG44's, M16's, MP40s, and much more. The weapons can be shipped to you immediately, all you need to do is say the word.

Upon investigation, the STG 44 best suits our needs for leaders and future upgrades. Please send 500x STG 44 with 3000 magazines and 90000 .30mm rounds. We will contact you should we request additional supplies.

Link to comment
Share on other sites

Yes, please provide bayonets with the m14s. Since we do not have an airport , we'll send a team to DE and link up with your team there once the goods are completed, so we won't trouble BT more than we have to and bring the cargo up ourselves. No training on the m14s are necessary for we have personnel who have knowledged in the m14 and will be training our regular army.

Please be advised that these weapons are not meant to be used, only for disipline and show of force; thus, there's no need for new attachments. The origional attachments will better suit our needs.

We are glad you mentioned the tactical gear suited for 7.62mm rounds and would like for you to provide those as well, if BT is able. We desire our personnal to carry six magazines as part of their combat load and will need about 12000 7.62mm magazines to accomidate their combat load requirements.

The new hardware on the rifles are merely part of the rebuild process. The rifles have seen extensive use over the years and the work we will do on them will extend their service life by another ten to fifteen years. The trigger assemblies are stock parts that we are taking out of our stores and the same applies for the other work.

The only new part of the original M-14 design is the fiberglass stock. These too are taken from our existing inventory.

The only distinguishable difference will be the dull brown exterior of the fiberglass versus the glossy sheen of the original wooden stocks. Given the wear and tear on the originals the replacements are needed. However, in the end, the M-14s will still look just like an M-14.

We have a local manufacturer who can produce the required tactical gear. We've requested them to make up 2000 sets of the required items. If you could perhaps forward some sort of rough draft of your requirements we'll get them started immediately.

They bayonets, the sheaths for the bayonets, the magazines, and the requested ammunition will be collected shortly for shipment.

We also are including, at no cost, 100 of our locally produced .357 pistols. These revolvers are considered obsolete by modern standards, but they are much favored within our ranks for never jamming and packing a heavy wallop when needed. Consider these pistols a gift from my nation to yours.

Link to comment
Share on other sites

The new hardware on the rifles are merely part of the rebuild process. The rifles have seen extensive use over the years and the work we will do on them will extend their service life by another ten to fifteen years. The trigger assemblies are stock parts that we are taking out of our stores and the same applies for the other work.

The only new part of the original M-14 design is the fiberglass stock. These too are taken from our existing inventory.

The only distinguishable difference will be the dull brown exterior of the fiberglass versus the glossy sheen of the original wooden stocks. Given the wear and tear on the originals the replacements are needed. However, in the end, the M-14s will still look just like an M-14.

We have a local manufacturer who can produce the required tactical gear. We've requested them to make up 2000 sets of the required items. If you could perhaps forward some sort of rough draft of your requirements we'll get them started immediately.

They bayonets, the sheaths for the bayonets, the magazines, and the requested ammunition will be collected shortly for shipment.

We also are including, at no cost, 100 of our locally produced .357 pistols. These revolvers are considered obsolete by modern standards, but they are much favored within our ranks for never jamming and packing a heavy wallop when needed. Consider these pistols a gift from my nation to yours.

I certainly can't turn down your generous gift of 100x .357 revolvers. CK appreciates the generosity of BT and we will make it return your kindness.

As far as tactical gear. We'll magazine pouches that will fit 3 mags each, thus, one soldier will be provided with 2 pouches. The pouches could either fasten to their pistol belts but we'd prefer they be attached to shoulder harnesses. That's all for now.

Once our economy becomes stronger, we will be providing our soldier's with body armor. Should BT produce body armor, please provide a list on what you currently have in stock or manufacture.

Finally, as far as adding the new attachments onto the M14s before shipment. We'd like to have BT send a team up with the merchandise, and provide training for select officals in CK on how to put together the new attachments to the M14s. We feel it would be excellent training for them, and a great way to foster relations between our nations.

Link to comment
Share on other sites

We placed the orders with our manufacturer to have a set of tactical gear made up to meet your specifications. They've returned this rough concept design:

Vest-Front-L.gif

We've set aside 100 of our limited edition .357 Magnum pistols and holsters. We've found that the pistols are quite popular with police officers due to their reliability and the ease of keeping them clean in harsh environments. Several dozen were given to our troops in Diberia and they are sending back good reports on their performance.

489918_tm-coltphyton357revolver4inchi.jpg

The refurbished M-14 rifles are coming along nicely. We've managed to complete 250 of them and will have the rest finished by the end of the month.

m14.gif

As you can see the rifle is identical to the original with the exception of the new fiberglass stocks. These stocks are far more resistant to stress and warping than their wooden counterparts.

Link to comment
Share on other sites

We placed the orders with our manufacturer to have a set of tactical gear made up to meet your specifications. They've returned this rough concept design:

Vest-Front-L.gif

We've set aside 100 of our limited edition .357 Magnum pistols and holsters. We've found that the pistols are quite popular with police officers due to their reliability and the ease of keeping them clean in harsh environments. Several dozen were given to our troops in Diberia and they are sending back good reports on their performance.

489918_tm-coltphyton357revolver4inchi.jpg

The refurbished M-14 rifles are coming along nicely. We've managed to complete 250 of them and will have the rest finished by the end of the month.

m14.gif

As you can see the rifle is identical to the original with the exception of the new fiberglass stocks. These stocks are far more resistant to stress and warping than their wooden counterparts.

CK is in debt to BT. Things seem to be moving along nicely. What type of plates for the vest do you provide?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...