Jump to content
  • entries
    17
  • comments
    103
  • views
    9,144

Dr Strangetech & the electronic backside kicking machine


Prime minister Johns

338 views

I have decided that my laptop simply will not cut it for gaming anymore and since I have been pulling extra shifts at work for the last couple of months I have some money floating around and I have bitten the bullet in a manner of speaking and I am building myself a desktop system again.

Here are the parts I am planning on buying:

CPU = Intel i5 2500 (3.3 GHz quad core)

Motherboard = GigaByte Z68XP-UD3

Memory= 8GB Patriot Viper-Xtreme Div.2

HDD = Seagate SATA 3 2TB (General storage)

SSD HDD = Patriot SATA3 PYRO 60GB (solid state drive for windows install, swap file & a few game installs)

Video = Gigabyte GTX550Ti

PSU = Coolermaster GX Power 750W

Case = Coolermaster NV-692A-KWN2 Nvidia Editon Adanced II

Optical = LG Bluray combo

Monitor = 20' BenQ monitor

So tell me what you think, is this a decent selection of parts for a budget gaming computer.

8 Comments


Recommended Comments

One thing that has always confused me. When you say you're going to build a computer, do you mean you're ordering all those parts and building yourself, or that another company is going to put those parts together for you?

Link to comment

One thing that has always confused me. When you say you're going to build a computer, do you mean you're ordering all those parts and building yourself, or that another company is going to put those parts together for you?

You can do the latter (places like CyberPower) but most of the time when people say they are building a computer, its the former. You can get the components off of Newegg or TigerDirect and put them together yourself and its almost always cheaper than buying a prebuilt desktop.

Link to comment

One thing that has always confused me. When you say you're going to build a computer, do you mean you're ordering all those parts and building yourself, or that another company is going to put those parts together for you?

The physical putting together is the easy part. If you happen to know how a screwdriver works and have a general idea that certain sized parts can only fit in certain sized holes, you'll do fine. The hard part is picking each component for performance, cost, and compatibility with each other, the latter being the hardest part.

Link to comment

I put the parts together myself, I can save quite a bit that way rather than just grabbing a prebuilt system.

It took me about 1 1/2 hours to put this lot together, but I work slow and read the manual a lot when I am doing this kind of thing since mistakes can be expensive.

Link to comment
Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...